AP2 headlight conversion [Archive] - Ozhonda Forums (2024)

Ozhonda Forums > Model Specific > S2000/NSX > AP2 headlight conversion

PDA

View Full Version : AP2 headlight conversion


ludecrs

05-10-2007, 05:36 PM

Fun day.

Easier than taillights? Yes.
Still annoying? Yes.
Worth doing? Yes.

Getting everything off was piss easy.

Differences:
Different star key alan keys. trip to local Supercheap - $14, as my old man has them out at the other house atm.

AP1 indicator bulb and socket is a bayonet, not a wedge bulb and socket. It don't fit - too large. I had some spare wedge sockets from my tail light conversion, so I hacked those up and put them in intead. Realised I had no T-20 wedge bulbs to use. Crap. Also I discovered, the parker lights are the same, but ours are amber, and the US use clear to flash in the amber section. 1 was amber and one was clear.... Another trip to local Supercheap store.

Using a file to file down the indicator wedge bulb and socket so it'd fit. Has to be done to all AP1 to AP2 conversions. Be careful not to get the scrap filed plastic into the headlight...... it's a prick to get out...... :thumbdwn:

-------

The bumper still isn't back on. I want to make sure the HID's are aligned before doing so. That's tonights / tomorrow's job.

Overall, it looks much ****ing better than the AP1's. Will look much better with the bumper on too. Now to arrange an AP2 front and mugen lip......

On with the pictures:

http://www.supercars.net/pitlane/pics/3287778c.jpg

http://www.supercars.net/pitlane/pics/3287778b.jpg

http://www.supercars.net/pitlane/pics/3287778d.jpg

http://www.supercars.net/pitlane/pics/3287778e.jpg

A new item that arrived a short while ago:

http://www.supercars.net/pitlane/pics/3287778g.jpg

And a new item that arrived as I was doing the install today:

http://www.supercars.net/pitlane/pics/3287778j.jpg

ludecrs

05-10-2007, 05:42 PM

Next up, is my J's Cf diffuser when it arrives...
should look a little something like this:

http://www.supercars.net/pitlane/pics/3277800c.jpg

Then, the glass window conversion is next...... After that.... either AP2 front bar and Mugen lip or stand alone ECU. Looking at AEM 1052U atm.

I'd like to do gears, but by the time all that gets sorted, it'll be about January time, which is house buying time..... but we'll see how things go.... Few cheap S/c in the US atm... :D

aznsiko

05-10-2007, 05:48 PM

SHWEET REAL NICE.. but u still owe me stickers lol..

.::F[L]Y::.

05-10-2007, 05:59 PM

didnt you get the ap2 ballast and wiring and all that? i remembered you mentioning it in another post awhile back?

Perry

05-10-2007, 09:58 PM

looking good

ludecrs

05-10-2007, 11:52 PM

Y::.;1374935']didnt you get the ap2 ballast and wiring and all that? i remembered you mentioning it in another post awhile back?

Yer I got all that stuff. Made it easier to wire up. Straight plug and play, instead of ghetto rigging the AP1 ballast with 4 screws, to the AP2 ballast, with 3 screws. Highly recommend spending the extra $300 or so to get them.

.::F[L]Y::.

06-10-2007, 12:01 AM

Yer I got all that stuff. Made it easier to wire up. Straight plug and play, instead of ghetto rigging the AP1 ballast with 4 screws, to the AP2 ballast, with 3 screws. Highly recommend spending the extra $300 or so to get them.

can you post up the link you used for reference in doing the swap man? may need it lol

ludecrs

06-10-2007, 12:10 AM

I used the Ricks clear diffuser for the removal of the bumper and lights.
http://www.ricks2k.com/info/instructions/diffuser.pdf

Other than that, like the taillights, I just winged it.

eriktufa

06-10-2007, 10:32 AM

Awesome job man :D

Can't wait for the next one.

BusterSonic12

06-10-2007, 05:52 PM

Next up, is my J's Cf diffuser when it arrives...
should look a little something like this:

http://www.supercars.net/pitlane/pics/3277800c.jpg

Then, the glass window conversion is next...... After that.... either AP2 front bar and Mugen lip or stand alone ECU. Looking at AEM 1052U atm.

I'd like to do gears, but by the time all that gets sorted, it'll be about January time, which is house buying time..... but we'll see how things go.... Few cheap S/c in the US atm... :D

what you mean glass window conversion??
what year model is your s2k?

ludecrs

06-10-2007, 05:57 PM

Mine is a YR2000.

Completed the install this afternoon. I put the bumper up, stood back, and went.... holy sh*t.

Took some better pictures than the workshop ones posted above.

Car is still filthy.

http://www.supercars.net/pitlane/pics/3287955b.jpg

http://www.supercars.net/pitlane/pics/3287955c.jpg

http://www.supercars.net/pitlane/pics/3287955d.jpg

http://www.supercars.net/pitlane/pics/3287955f.jpg

BusterSonic12

06-10-2007, 06:05 PM

so if it easy to do the rear glass conversion??

LOOK FKN AWESOME!!! SERIOUSLY!!

ludecrs

06-10-2007, 06:09 PM

Its been done by a couple of other members here. Usually takes 1 whole day to do, morning til night. I plan to do it over a weekend.

BusterSonic12

06-10-2007, 06:12 PM

^ sweet thanks for the info.
Because i been lookin to sell my euro to get a s2000. but 2002+ models all out of budget, lookin for 2000 and 01, and i wanted the glass window instead of the plastic also. I heard there are buzzing noise in the 00 and 01 from the clutch, do u experience that or u changed yours?

ludecrs

06-10-2007, 06:19 PM

I have clutch buzz, yep. I don't mind it though. Kind of grows on you.

You can buy the replacement glass roof from ebay US for about $800 landed here in Oz.

xntrik

06-10-2007, 06:31 PM

Should've done a DIY if there wasnt already one.

.::F[L]Y::.

06-10-2007, 07:06 PM

awesome job. will pm you when im gona do my swap hahaha

ludecrs

06-10-2007, 08:17 PM

Looking at the pictures reminds me I have to remove the black window tape around the front wind shield.

Foglights are missing since I broke one about a week or 2 ago. Decided to remove both until I replace them with new ones. Figured it'd look better. hahaha.

MRSPCS

11-10-2007, 12:32 AM

lude it looks sexy bro!!
Ive been too lazy to source the ap2 tail lights and headlights..
i managed to do the front+rear bar so far.. thought the front bar needed alittle modification, but it was just a direct bolt on..
when i'm bothered, i'll finish the conversion..

ludecrs

11-10-2007, 12:44 AM

Set of rear AP2 taillights on ebay USA atm.... $300US + post..... will post worldwide.... just a heads up....

.::F[L]Y::.

11-10-2007, 12:46 PM

Set of rear AP2 taillights on ebay USA atm.... $300US + post..... will post worldwide.... just a heads up....

are you reffering to the one on ebay??

if so i bought it :p

datzlr

18-10-2007, 11:08 PM

wtf u payed 300 for em ?

ludecrs

18-10-2007, 11:27 PM

That's the going rate..... Think I paid $500AU but mine were brand spanking new.

.::F[L]Y::.

18-10-2007, 11:28 PM

ludecrs-just wondering if im using the ap1 ballast and existing hardware would i need to shave or cut anything for it to fit the ap2 housing? there isnt exactly a detailed diy for the headlights on s2ki

ludecrs

18-10-2007, 11:33 PM

Ap1 ballast has 4 screws holding it in place on the AP1 headlight housing.

AP2 ballast has 3 screws holding it in place on the AP2 headlight housing.

Mouting it on, I presume would just be a matter of getting some metal stripping long enough to cover the ballast, and wrap around the underside of the housing. Then gluing the metal striping to the plastic AP2 headlight under housing section with some form of Dynagrip / Permatex glue.

Or you can save yourself alot of hassle and just buy the AP2 ballasts etc and just screw them straight in :p

.::F[L]Y::.

18-10-2007, 11:36 PM

doing tail lights this weekend. lol

lets hope it goes well.

ludecrs

18-10-2007, 11:38 PM

I recommend a dremel / rotary :p

Supercheap has them at 25% off this weekend only. Something like $29.... Sold one today to a guy.

EDIT: YOu have all the bulbs and sockets required?

ludecrs

18-10-2007, 11:40 PM

I forgot to mention, I remember reading alot, the AP1 ballasts being mounted to the AP2 headlight require a slight shaving somewhere as the AP1 ballast rubs against the bumper and can cause it to crack over time...... Might have to check on s2ki.com to make extra sure.

.::F[L]Y::.

18-10-2007, 11:46 PM

I recommend a dremel / rotary :p

Supercheap has them at 25% off this weekend only. Something like $29.... Sold one today to a guy.

EDIT: YOu have all the bulbs and sockets required?

yep. tailights came with sockets and bulbs. so i just need to shave the tabs from the looks of it and do some cutting lol

borrowing an airsaw and dremel from a mate so hopefully wont take ages to do

BRU51N

19-10-2007, 01:26 AM

Next up, is my J's Cf diffuser when it arrives...
should look a little something like this:

http://www.supercars.net/pitlane/pics/3277800c.jpg

Then, the glass window conversion is next...... After that.... either AP2 front bar and Mugen lip or stand alone ECU. Looking at AEM 1052U atm.

I'd like to do gears, but by the time all that gets sorted, it'll be about January time, which is house buying time..... but we'll see how things go.... Few cheap S/c in the US atm... :D

where are u getting the diffuser from? and how much is the damage if u dont mind me asking?

ludecrs

19-10-2007, 10:50 AM

Diffuser is coming straight from J'a Racing JP.

Got it through Ivan. Cost was about $1200.

.::F[L]Y::.

21-10-2007, 01:10 AM

hey, just wondering. since im gona be using the ap1 ballast. would it just be plug and play into the ap2 housing apart from the ballast fitment?

or would i need ap2 sockets or hacking at the plugs like the tailights.

I did the ap2 tail light conversion today. wasnt too bad but i kept snapping blades for the air saw which was a bitch.

ludecrs

21-10-2007, 06:46 AM

The ballast itself it the same direct fitment to the plug at the back of the light, yes.

However, the AP2 indicator socket is much smaller than the AP1. I used some of my taillight sockets left overs and hacked them up and used them instead. They are T-20 wedge bulbs, available at any Supercheap, Repco or Autobahn store.

The parker light is the same connection socket, but a different plug. Will require "customizing" also to fit to the old wires still on your car.

.::F[L]Y::.

21-10-2007, 09:48 AM

oh ok. thanks for the heads up.

.::F[L]Y::.

22-10-2007, 07:52 AM

ludecrs- with the ap2 ballasts would i also need to buy the ap2 wiring or could i use the existing ap1 wiring?

ludecrs

22-10-2007, 06:59 PM

the ballast wiring is pretty much exactly the same. Same plugs etc, so no problems there.

.::F[L]Y::.

23-10-2007, 12:03 AM

with the indicator socket. theres an alternate solution. you can use another plug from an integra LOL

so all we did was use the socket from the tailight and then used the plug from the integra. all good with that.

so yeh. once i get the ap2 ballast im gona slap the headlights on, nice and easy swap.

zero33

07-12-2007, 01:12 AM

anyone know where i can find a DIY for the front and rear AP2 conversion and all the parts required for it..

ludecrs

07-12-2007, 01:23 AM

Wanna buy a set of AP2 headlights? I have a set coming in 2-3wks time.

Mitchman

19-12-2007, 08:03 AM

ludecrs your s2k is f'n hot dude, that front end is sex!

Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.

AP2 headlight conversion [Archive]  - Ozhonda Forums (2024)

References

Top Articles
Dust Cornell
Hot Shot Trailers - Diamond C Trailers
Jennifer Hart Facebook
Botw Royal Guard
Team 1 Elite Club Invite
Senior Tax Analyst Vs Master Tax Advisor
Songkick Detroit
Obituaries
Fnv Turbo
Embassy Suites Wisconsin Dells
Www Thechristhospital Billpay
Walthampatch
Fairy Liquid Near Me
Bowlero (BOWL) Earnings Date and Reports 2024
Finger Lakes Ny Craigslist
Beebe Portal Athena
Craighead County Sheriff's Department
Mail.zsthost Change Password
Isaidup
Www.patientnotebook/Atic
11 Ways to Sell a Car on Craigslist - wikiHow
Loslaten met de Sedona methode
Darrell Waltrip Off Road Center
Skymovieshd.ib
Weather October 15
Tom Thumb Direct2Hr
San Jac Email Log In
Ewg Eucerin
Tu Housing Portal
Mosley Lane Candles
Myra's Floral Princeton Wv
Citibank Branch Locations In Orlando Florida
Does Circle K Sell Elf Bars
Sun Haven Pufferfish
M3Gan Showtimes Near Cinemark North Hills And Xd
Helloid Worthington Login
Streameast.xy2
“Los nuevos desafíos socioculturales” Identidad, Educación, Mujeres Científicas, Política y Sustentabilidad
Umiami Sorority Rankings
Unveiling Gali_gool Leaks: Discoveries And Insights
Centimeters to Feet conversion: cm to ft calculator
Backpage New York | massage in New York, New York
St Anthony Hospital Crown Point Visiting Hours
Jigidi Free Jigsaw
Marcel Boom X
Join MileSplit to get access to the latest news, films, and events!
How to Do a Photoshoot in BitLife - Playbite
Okta Hendrick Login
ESPN's New Standalone Streaming Service Will Be Available Through Disney+ In 2025
Unit 4 + 2 - Concrete and Clay: The Complete Recordings 1964-1969 - Album Review
Marion City Wide Garage Sale 2023
Shad Base Elevator
Latest Posts
Article information

Author: Kimberely Baumbach CPA

Last Updated:

Views: 5737

Rating: 4 / 5 (61 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Kimberely Baumbach CPA

Birthday: 1996-01-14

Address: 8381 Boyce Course, Imeldachester, ND 74681

Phone: +3571286597580

Job: Product Banking Analyst

Hobby: Cosplaying, Inline skating, Amateur radio, Baton twirling, Mountaineering, Flying, Archery

Introduction: My name is Kimberely Baumbach CPA, I am a gorgeous, bright, charming, encouraging, zealous, lively, good person who loves writing and wants to share my knowledge and understanding with you.